Stops damp and mould
THE BEST SOLUTION FOR CAPILLARY DAMP
Moxture is the best technology for drying damp walls and preventing capillary rising damp.
- Affordable
- Very quick and 100% effective solution
- One-time treatment and cost
- No expensive servicing and additional hidden costs
- 40-year warranty
- Tested with over 35 years of experience
- Ecological and sustainable solution
Damp and mould are problems that will not go away without professional help and comprehensive rehabilitation. Unfortunately, both problems adversely impact our health and, even worse, the sturdiness and aesthetics of the building.
Got damp in walls?
We have a solution!
Damp in walls
Capillary rising damp that occurs in walls is unpleasant and harmful. Damp apartments are the cause of many diseases, and damp can also directly damage the building as it affects the quality of building materials.
Dangerous mould
The reason why mould is so dangerous is that its spores are so small that up to 250,000 can settle on the head of a pin and can penetrate the body’s defence mechanisms and adversely affect health.
Health and wellbeing
5 reasons why moisture is so dangerous: Development of bacteria, mites, mold, pests, destroys building materials, …
Installation
Our patented condensers can be installed inside damp walls, allowing condensation to occur and the walls to breathe.
Condensation
The condensers will evaporate moisture from damp walls, which means that the wall will start to dry naturally.
Drying
Walls can dry in very short time, from 4 to 6 months. Dry walls are better thermal insulators and improve the standard of living.
Reference
Improve your living conditions
For more than 30 years, we have been helping families solve one of the biggest problems that can plague any home. Damaged or improperly executed insulation will allow moisture into your walls. The best solution is MOXTURE system for draining the walls of excess moisture.
Affordable and simple way to ensure a dry home.
Ensure your comfort and treat yourself to a life free of damp and mould.
Order in three easy steps. Within a few weeks after evaluation, inspection and confirmation, your house, facility or building can begin to dry.
Order
All we need to know is the square meters of the damaged surfaces and photographs showing the problem. Based on this information, we can provide an indicative offer. Call or send an enquiry. If you are interested in our services, we organise a visit to the building, take measurements and offer solutions.
Instalation
After confirmation, we visit the facility, rehabilitate the damp walls, insert the condensers, which start drying the walls immediately. After a certain period, when they have dried, they can be re-finished.
03
Dry walls
Drying starts immediately. Drying time depends on the dampness and thickness of the walls; however, the average drying time is 4–6 months after the works.
Send inquiry
Moxture
Dries damp walls and protects your home or building against capillary rising damp for decades. Enjoy a better and healthier life.
No more problems with damp.
No more high energy costs.
No more bad smells of damp and mould.
Just healthy and pleasant living.
Frequently Asked Questions
WHAT DO YOU DRY OUT WITH THE MOXTURE SYSTEM AND WHAT FUNCTION DOES THE MOXTURE SYSTEM HAVE?
Moxture is a system for drying damp walls in a natural way and for life. It is mostly used in older buildings that have poorly performed waterproofing, or do not have it at all, so there is capillary traction and the walls are soaked with water. Our system is the only one that actually dries out the walls in a natural way. It is also an excellent solution for wetlands where there is excessive soil moisture, as well as for areas where floods are frequent, because when the water floods the building, the moment it drains, the building begins to dry out.
OUR HOUSE IS 100 YEARS OLD, IT HAS NO WATERPROOFING AND OF COURSE IT HAS CAPILLARY MOISTURE? HOW CAN YOUR SYSTEM HELP US WITHOUT DOING GREAT INTERVENTIONS ON THE HOUSE (DRAINAGE, WATERPROOF REPAIR,…)?
Old houses have poorly executed waterproofing or no waterproofing at all, which means that the water is free to flow and the walls absorb it. This is called capillary traction. With our system, we do not prevent moisture from entering the walls themselves, but it allows real-time drying of any moisture that would enter, so we say that it is a lifelong solution, as it is impossible for the walls to re-absorb water as it dries out due to condensers. In this way, we have successfully drained many buildings that are still dry today.
DO YOU ALSO MAKE HUMIDITY MEASUREMENTS AND MONITOR THE DRYING PROCESS ITSELF?
Absolutely. Measurements are performed during the inspection and before the renovation of the building. We monitor the drying and visit you for a couple of months, take measurements to see how the drying process is progressing. When the level of humidity reaches normal (when the walls are sufficiently dry), the renovation of the walls themselves can be continued, or a new facade, whitewashing, (
IN OUR HOUSE, THE CELLAR WALLS ARE FULL OF MOISTURE? CAN YOU HELP US?
Of course, basements can also be rehabilitated and drained. In the event that it is not possible to carry out our system on the outside of the building, we can also renovate the interior. In your case, this would be in the basement where you would drill the wells, insert the condensers and the drying would start. However, in such a case, we recommend good ventilation, whether it is with windows (drafts), if they are in the room, or with a good ventilation system, which would also remove moisture that would be released from damp walls from the room. In case you also need a ventilation solution, we also have a great solution for this.
WE LIVE IN A WETLAND AREA, OUR HOUSE IS OLD, PROBABLY WITHOUT APPROPRIATE INSULATION, THE PROBLEM WITH HUMIDITY IS HUGE, BECAUSE THE MOISTURE HAS ALREADY GOT INTO THE UPPER SPACES OF THE HOUSE. IS YOUR SYSTEM SUITABLE FOR SUCH AREAS?
Capillary traction can rise up to 6 meters high and up to 450 liters of water can accumulate in a cubic meter, which means that it can moisten the entire house. Given that you are in a swampy area, this is a big problem. Our system is great for such facilities, as all the moisture that will enter the walls will be constantly drained, the walls will dry out, the upper part of the house will dry out. Moisture can severely damage building materials and can affect building statics. Mold that develops due to moisture can be very harmful to health.
WHAT IS THE DIFFERENCE BETWEEN CAPILLARY MOISTURE AND CONDENSATION MOISTURE? SINCE WE INSTALLED NEW WINDOWS AND DOORS, MOLD AND CONDENSATION APPEARS AND WE DON'T KNOW HOW TO HELP YOURSELF.
Capillary moisture means the rise of water from the ground into the walls, this is called capillary traction. Capillary traction occurs if there is no adequate insulation, waterproofing or only poor insulation.
In the case of condensing moisture, we have room humidity. Room moisture is created during cooking, washing, showering, breathing, drying clothes in the room,… With inadequate ventilation, this moisture accumulates and condenses in the room. Moisture then causes mold, mold is a child and a consequence of moisture. The best solution for condensing moisture is adequate ventilation, make a draft at least 2x a day throughout the apartment or a suitable ventilation system that will ensure that the air is constantly circulating and thus help to remove excess moisture. It is also a fact that humid air is much harder to heat or cool, so you may also have higher cooling or heating costs. With a good ventilation system – recuperation can solve this problem in the long run. In case you are interested, contact us as we have a great solution.
DURING THE SEVERE FLOOD THAT COVERED US YEARS AGO, WE STILL HAVE CONSEQUENCES. BECAUSE WE ARE AFRAID THAT THIS PROBLEM WILL OCCUR AGAIN WE NEED A PERMANENT SOLUTION. HOW YOUR SYSTEM CAN HELP US?
Great question. Flooding a house can be a big problem, as it can cause enormous damage. The water that floods the house is absorbed into everything: walls, parquet, laminate,…
Because it is difficult to dry, the materials begin to disintegrate, rot and mold, which is very harmful and unpleasant.
In case you have our system already done and if a flood occurs, drying will start as soon as the water recedes. If it has watered and filled the openings, rinse them with water and the drying process begins immediately. The walls will dry in a much faster time than if they were dried in other ways. This would save you a lot of inconvenience and damage.
DO YOU USE CHEMICALS IN YOUR SYSTEM AND DOES IT NEED ELECTRICITY TO WORK?
No, neither. We are not supporters of chemicals, as they harm us and the environment, and also do not consume electricity, or depend on it. Nature can take care of everything if we make her way. We give nature the opportunity to do its job, in a natural and healthy way.
DOES YOUR SYSTEM AFFECT BUILDING STATICS?
No, it does not affect the statics of buildings. Moisture does more damage, destroying building materials, foundations and construction. Our system is completely safe and of course efficient.
CAN WE HAVE A LOSS IN HEATING ? ARE THE HOLES MADE ALLTHROUGH THE WALL?
No, there is no loss, at most savings. Damp walls are an inappropriately worse insulator than dry ones, which means that much more heating is required for damp walls than for dry ones. The wells do not get through the wall, but up to a certain length and because they dry the walls, less heating and of course cooling is required. By using thermal paints for the interior as well as the facade, you can save much more on both cooling and heating.